zone-alpha

This article is very useful, and therefore I publishing it right here,

This is a way to reinstall xp with flash. First I just thought that only Linux can be like this, but apparently windows can.

Yes, let's to the point, following a re-install using the flash:
First, move the windows xp to flasdisk with the software below, (download first) USB_PREP8. Before moving windows XP should flasdisk in the first format using PeToUSB I have to prepare.




Please download USB_PREP8 and PeToUSB (you can search at google)
Download USB_PREP8
Download PeToUSB

After you download the file above extrak file. and then follow the steps below:

2x click the file to format the USB PeToUSB (remember Flasdisk already attached)

Click the star button then press Yes





After format is complete close PeToUSB

Then insert the Windows XP Installan in flasdisk
2x usb_prep8.cmd click on the folder existing usb_prep8

it will appear like this (the Windows XP CD you have entered)

Press any keyboard key to continue


Press 1 to select the drive where the windows installation files are located, (Change XP Setup Source Path, currently)

A window will appear and select the drive containing the Windows XP setup CD you. Click [OK]. For example in F, click in there, ok

Then select the menu number 3) Change USB-Drive Target Letter, currently
Type the drive letter that contains your USB Flash Disk. For example, on drive H:


Once completed select the menu number 4 Make New TempImage with XP LocalSource and Copy to USB-Drive


Press Y to start the formatting


Press any keyboard key to continue


Press yes to copy temporary files to usb


Yes again and press


Press Yes again

after the press any key to end the process
Once completed in Flasdisk can use to make re-install

Before you begin the installation make sure that the booting sequence is set up so that you bootnya's first USB Flash Disk.
aja to enter BIOS menu. How, turn on the computer / laptop you press delete or F2 on the keyboard

After that go to the settings in the Bios booting
Change first boot (the first podići) USB Hard Drive / Flash Drive Cd I use the first boot is CD-ROM (see here can be reset using the install CD)

Click Save and Exit, the computer will restart.

If all goes smoothly, at the time the computer will turn back to boot from a USB Flash Drive and you will show the options menu

Select the [TXT Mode Setup Windows XP, Never Unplug USB Drive Until After logon].
IMPORTANT: Do not pull out the USB Flash Drive to a Windows XP installation is completed entirely.

Windows XP setup will start. Do as if you are using a CD

After the setup finished copying files to your hard drive, setup will make the computer restart.

IMPORTANT: Select the [GUI Mode Setup Windows XP, Continue Setup + Start XP].
Windows Setup will continue to use the display setup GUI (Graphical User Interface) while copying from a USB Flash Drive.

Continue installation as usual.

If you are finished you can pull out the USB Flash Drive. USB / Flasdisk you can use to perform repair your Windows XP when there are problems or interference on your windows XP.